Coil Caddy w/ Heater Coil and Controller

The Coil Caddy w/ Heater Coil and Controller is the whole torch-free setup in one box. A stainless steel caddy, the 30.2mm heater coil that drops into it, and a MiniNail controller in the color you pick.

Set your quartz in the caddy, dial a temperature, lift it out when it is ready.

🔥 Heat It in the Stand

Your quartz sits down inside the caddy while it comes up to temperature. When it is ready you lift it out and set it on the rig.

The coil, the cable and the heat all stay in one place on your mat.

📏 What Fits in It

The coil is 30.2mm wide and 60mm deep, which is the measurement that decides whether your quartz drops in.

• Terp slurpers and towers up to 30mm wide
• Standard quartz bangers
• Wireless Flower Wand

The wand and a slurper drop into the same coil, so going from flower to concentrate is a matter of lifting one out and setting the other in. No adapter, nothing to change over.

A cutout in the shield lets a banger seat all the way down rather than perching on the rim, so the coil reaches the base and the walls together.

🎛️ Any MiniNail Controller Runs It

A controller is included and you pick the color at checkout. If you already own a MiniNail controller, this caddy works with it too, and the Coil Caddy with Heater Coil is the same setup without a second controller in the box.

Running quartz wider than 30mm? The XL Coil Caddy Kit takes the 40mm coil.

⚙️ Specifications

• Stainless steel caddy with a heat shield
• Weighted base
• 30.2mm Hybrid Heater Coil, 60mm deep
• Heat from the base and the sidewalls
• Fits terp slurpers and towers 30mm and under
• Works with any MiniNail controller box
• Controller color chosen at checkout
• 2 year warranty on the controller and the heater coil

📦 What's Included

• 1× Coil Caddy stand and heat shield
• 1× 30.2mm Hybrid Heater Coil
• 1× MiniNail Controller, your choice of color
• 1× Mini screwdriver and 2× set screws

Caddy, coil and controller. A banger, slurper or wand is sold separately.

🎯 What It Pairs With

• Terp Slurper Sets - slurper, spinning pillar and cap, sized for this coil
• Quartz Bangers - 20mm, 25mm and 30mm XL
• Coil Caddy Guard - a silicone sleeve between your hand and the hot cup
• Coil Guard & Caddy Screw Set - spare set screws and the driver that fits them
• Coil Caddy Heater Coil 30.2mm - a spare or replacement coil
• Coil Caddy Accessories - everything sized to this setup

🧠 Pro Tips

• Recommended range: 500 to 700°F. Start at 600°F, then go up or down 25°F at a time until you find your sweet spot. Quartz in a caddy comes up from cold, so give it the full warm-up before the first one.
• Seat the quartz all the way down. A slurper perched on the rim heats its top and not its base.
• Lift by the joint, not the bucket. The bucket is the part that just spent five minutes in a coil.